MOOSE Z950 Manual de usuario descargar pdf (Pagina 23)

Access (U.L. Note: The control is not listed to Standard U.L. 294 Access Control

Units.)

If your system was purchased with the ACCESS feature, the keypad can be used

to switch other devices on and off or as a timed switch. This feature is most

commonly used to activate an electric door release or switch lights on and off.

Consult your security company representative for more information.

The Reset Key

The Reset (*) key may be used to:

* Silence the keypad sounder and the audible output during

Auxiliary "A" (Fire) and Auxiliary "C" alarms.

* Silence keypad sounder during Burglar alarms.

* Exit the audible test mode.

* Pressing the Reset (*) key does not reset alarms or cancel

reporting to the central station.

Remote Programming

Your system is capable of being serviced remotely from the alarm company's ser-

vice office providing that the system is set up for Remote Programming. The sys-

tem provides a means of verifying that this feature is enabled. Contact your secu-

rity company representative for more information.

Alarm Memory

To View The Last Alarm That Occurred:

I . The system must be disarmed.

2. Press the "3" key and hold for three seconds. The keypad will beep three

times.

3. The corresponding zone indicator(s) indicate the zone(s) that caused the last

alarm.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 50 51

Sin comentarios

MOOSE Z950 Manual de usuario Pagina 23