MOOSE Z950 Manual de usuario descargar pdf (Pagina 8)

Arming The System Without Leaving

Your security system is divided into two areas of protection:

1. PERIMETER - The first line of defense. Consists of one or more zones which

detect intrusion through doors and windows.

2. INTERIOR - The backup or second line of defense. Consists of one or more

zones that detect intruders that have already entered the building. Interior

detection devices usually consist of motion detection devices, interior

door contacts, and under carpet sensors, designed to surprise the

intruder.

Prior to arming the control, you may first choose to turn off the interior protection,

allowing free movement within the building when armed.

Turning Off The Interior Zones (Key 4) and Entrance Delay (Key 5)

Key 4 may be used to turn the interior zones off prior to arming.

1. Press the 4 key and hold for three seconds.

2. When interior defined zones are turned off, their corresponding Zone

indicators will flash. They may continue to flash until 30 seconds after

the system is armed or they may flash for the entire time that the system

is armed. The installer can program how the flashing operates.

3. Arm the system by entering your User Code.

NOTE

Upon disarming, the interior zones automatically re-enable unless your

installer has altered this feature through programming.

Key 5 may be used to turn the entrance delay time off. Press the 5 key and hold

for three seconds to turn off the entrance delay. When the delay is turned off, the

armed light will not blink after arming. This will allow the system to alarm instantly

if the entrance door is opened while armed.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 50 51

Sin comentarios

MOOSE Z950 Manual de usuario Pagina 8