MOOSE ZXSSD Información técnica descargar pdf (Pagina 47)

Multi-Area Operation

(ZX400/ZX410 only)

Your system may be configured with two separate areas of protection.

For example, a duplex may have one system but have both halves set

up as separate areas for protection. Or, you may have one system for

your house and a storage building with each building set up as sepa-

rate areas for protection. See your security company representative for

more details.

If you have access to both areas through a Control Station, the Control

Station will prompt you to make an area selection for Area 1, Area 2, or

both for any operation, test, or programming that is performed. The

display will alternate between the Primary and the Secondary area

when the Secondary area is turned ON or in alarm.

EXAMPLES:

If you press then enter your passcode, the Control Station will

display:

Your options are: Press 1 for Area 1

Press 2 for Area 2

Press 3 for both

If Area 1 is turned OFF and Area 2 is turned ON, the display will

alternate between the Ready display for Area 1:

and the ON display for Area 2:

MULTI-AREA OPERATION

AWAY

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 63 64

Sin comentarios

MOOSE ZXSSD Información técnica Pagina 47