13
If the ENTER or CLEAR key is pressed and no changes have been made, the Control Station will return to the Zone ID
prompt. If the CLEAR key is pressed and changes have been made, all changes will be cleared and the control station will
return to displaying the original Zone Name. To save any changes made to the Zone Name, press the ENTER key. The
control station will return to the Zone ID prompt. Press the CLEAR key to return to idle.
This function provides a means to completely wipe out the panel’s memory and restore it to a factory default state. If
successfully completed, the panel will:
• default the entire Function Map (including Zone Names and User Passcodes)
• clear the Event Log and log a “System Startup” event
• clear all alarm, trouble and armed conditions
• not affect the System Clock (time and date).
• not affect data programmed in the RF Gateway(s)
If the panel has been programmed from RPM/2 Pro and the Agency Code has been loaded into the panel, then this function
will be disabled.
After entering programming mode, press the ‘6’ key to enter Restore Factory Defaults mode. The Control Station will
prompt you to re-enter the installer passcode for verification.
If it is entered correctly, the Control Station will go back to the system powering up display.
3.1.6 Restore Factory Defaults
The installer passcode does not have the authority to edit user passcodes locally and only high level user passcodes (User
Code 1 at default) have the authority to edit user passcodes. If you need to edit user passcodes or if the User Code 1
passcode is forgotten, this function may be used to reset the User Code 1 passcode back to the default value of “1234”.
After entering programming mode, press the ‘5’ key to default the User Code 1 passcode. The Control Station will prompt
you to re-enter the installer passcode for verification.
If the passcode is entered correctly, the Control Station will display an acknowledgment and return back to the idle mode.
3.1.5 Default User Code 1
TO DEFAULT USER1
ENTER PASSCODE
USER1 DEFAULTED
TO DEFAULT PANEL
ENTER PASSCODE
WWW.DIYALARMFORUM.COM
(64 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales