29
Location Default
Telephone 1 (16 digits) [337 - 352] all F’s
Telephone 2 (24 digits) [353 - 376] all F’s
RPM/2 Pro Phone (16 digits) [377 - 392] all F’s
Communication Telephone Number Default Table
Event reporting assignments for each telephone number are programmed under the Area Event Reporting section. (See
Section 3.2.9.) The assignment of telephone dialing options and reporting formats are programmed under the Communica-
tor Options section. (See Section 3.2.7.)
3.2.8 Communication Telephone Numbers Description
All receivers listed functioned with the listed formats at time of testing. Modifications or programming changes may affect
receiver operation. Consult manufacturer of specific receiver for setup and operation.
Receiver Compatibility Table
Receivers Transmission Format Transmission Speeds (Pulse Reporting Only)
Ademco 685 3/1, 4/2, Contact ID 20B
FBI CP220 3/1, 4/2, Contact ID 20B - 40B
Osborne-Hoffman (Quick Alert) 3/1, 4/2, Contact ID 20B - 40B
Radionics 6000 3/1 20B - 40B
Radionics 6500 3/1, 4/2 20B - 40B
Silent Knight 9000 3/1, 4/2 20B - 40B
MLR-2DG 3/1, 4/2, Contact ID 20B - 40B
T1 Dial Attempts 1 to 15 attempts
T2 Dial Attempts 1 to 15 attempts
On-Hook Time 1 to 15 seconds
&
Off-Hook Time
Maximum number of dial attempts when the communicator dials telephone #1.
Maximum number of dial attempts when the communicator dials telephone #2.
Before the communicator dials a phone number, it seizes the phone line and goes
off-hook for two seconds. It will then go back on-hook for the On-Hook Time to
disconnect an existing phone connection. The communicator will then go back
off-hook for the Off-Hook Time to acquire dial tone before dialing.
T2 telephone number has extra digits to allow for pager reporting. All six digits of the account code and both digits of the
report code will be added on to the end of Telephone number 2. The digits in the telephone number will consist of the
pager’s phone number, a significant delay, and possibly the beginning of the pager message. The telephone number will be
dialed for the number of dial attempts programmed and the pager message will be blindly sent each time. There will be no
feedback and, therefore, no failed to communicate.
Item Description
T1 Telephone Number 16 hex digits
T2 Telephone Number 24 hex digits
RPM/2 Pro Telephone Number 16 hex digits (Available for future use.)
The following table refers to programming locations 337 through 392:
WWW.DIYALARMFORUM.COM
(64 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales